[rear-users] After installing REAR, my Debian server starts without a network

[Sander, Ulrich]

Hello Stefan,
are you able to configure your network manually?
Did the error occurs after the installation or after the first backup? Probably you made no boot after the installation and before the backup. Then you don’t know…

Rgds
Ulrich

Von: rear-users-bounces at lists.relax-and-recover.org [mailto:rear-users-bounces at lists.relax-and-recover.org] Im Auftrag von [EXT] SHarbich at t-online.de
Gesendet: Mittwoch, 31. März 2021 00:16
An: [EXT] rear-users at lists.relax-and-recover.org <rear-users at lists.relax-and-recover.org>
Betreff: [rear-users] After installing REAR, my Debian server starts without a network


Hello,



i have a very big problem. After installing in REAR on my Debian server and performing a backup, my Debian server only starts without a network. This is not good!
Okay my versions:
Debian Buster Server, REAR Version 2.4 + dfsg-1.

...

root at ldap:~# cat /etc/rear/local.conf
OUTPUT=USB
BACKUP=NETFS
BACKUP_URL="usb:///dev/sdc2"
GRUB_RESCUE=1

...

I executed the following commands to save a backup on a USB hard drive.

...

rear -v format -- --efi --force /dev/sdc1

rear -v mkbackup

...

When my server starts, I see the following note in the boot journal.

...

Mär 30 23:32:22 ldap systemd-udevd[318]: Spawned process '/usr/sbin/rear udev' [365] is taking longer than 59s to complete
Mär 30 23:32:22 ldap systemd-udevd[288]: sdc2: Worker [318] processing SEQNUM=1928 is taking a long time
Mär 30 23:33:19 ldap systemd[1]: ifupdown-pre.service: Main process exited, code=exited, status=1/FAILURE
Mär 30 23:33:19 ldap systemd[1]: ifupdown-pre.service: Failed with result 'exit-code'.
Mär 30 23:33:19 ldap systemd[1]: Failed to start Helper to synchronize boot up for ifupdown.
Mär 30 23:33:19 ldap systemd[1]: Dependency failed for Raise network interfaces.
Mär 30 23:33:19 ldap systemd[1]: networking.service: Job networking.service/start failed with result 'dependency'.
Mär 30 23:33:19 ldap systemd[1]: Reached target Network.

...

help, help
What can I do to get my Debian server to start correctly again? REAR seems to be checking something during the boot process, which means that my network interfaces no longer come up. These are configured as bonding (eth0 and eth1) and everything worked until the REAR installation.

I need support.



Greetings from Stefan Harbich


-----
Leopold Kostal GmbH & Co. KG, Registergericht Iserlohn HRA 5325, phG KOSTAL Verwaltungsgesellschaft Zwei mbH, Wien, Österreich – Handelsgericht Wien FN 526709 y - USt-Id-Nr./Vat No.: DE 327907963

Post- und Werksanschrift: An der Bellmerei 10, D-58513 Lüdenscheid * Telefon: +49 2351 16-0 * Telefax: +49 2351 16-2400 Bellmerei

Geschäftsführung: Dipl.-Oec. Andreas Kostal (Vorsitzender), Dipl.-Ing. Kai Knickmann, Dr. Gregor M. Schmeken


The information contained in this email and any attachment herein is strictly confidential.

It is exclusively addressed to the intended addressee(s). If you are not an intended addressee, any review, use, disclosure, reproduction, distribution or other dissemination of this information is strictly prohibited. If you have received this e-mail by mistake, please notify the sender and delete this e-mail and the information contained herein immediately.


In the case of a first contact by email, we are obliged to provide you with the following mandatory information in accordance with Art. 12, 13 GDPR. If you contact us by email, we will process your contact data and information on your request for the purpose of processing your request. You are not obliged to provide this data. Without this data, however, we cannot process your request properly. If you contact us as an interested party or customer, we process the data for the purpose of carrying out pre-contractual measures at your request or for the execution of a contract with you (Art. 6 para. 1 sentence 1 lit. b GDPR). In addition, the legal basis for this processing is the balancing of interests (Art. 6 para. 1 sentence 1 lit. f GDPR). In this case, our legitimate interest is to process the request you have communicated. If you have given your consent to data processing (Art. 6 para. 1 sentence 1 lit. a GDPR), we will process the data on the basis of this consent. You can revoke this consent at any time at datenschutz at kostal.com. We will store this data for the duration of processing your request and thereafter for the duration of the statutory storage obligations (Art. 6. Para. 1 sentence 1 lit. c GDPR). You can find further information at https://www.kostal.com/en-gb/datenschutz.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.relax-and-recover.org/pipermail/rear-users/attachments/20210331/03e15b0f/attachment-0001.html>