[rear-users] hpacucli-commands.sh missing

Mike Duthie mike.duthie at gmail.com
Wed Oct 2 09:00:52 CEST 2013


On 10/01/2013 07:18 PM, Gratien D'haese wrote:
>
> Hi Mike,
>
> 1. please ask your customer v1.7 is out of support, so upgrade it asap 
> (best to remove rear-v1.7 first to be sure)
>
> 2. why don't you remove /var/lib/recovery/hpacucli if you do not need 
> it (before running rear recover)? It is worth a try.
>
> regards,
>
> Gratien
>
> On Tue, 01 Oct 2013 15:52:20 +1000, Mike Duthie 
> <mike.duthie at gmail.com> wrote:
>
>     Hello,
>
>     I am trying to assist a customer recover a server using ReaR 1.7
>     (yes I know its old, upgrade has been recommended).
>
>     The original server and new server are bothHP ProLiant BL460c G7.
>
>     We have booted from the ISO, configured the NICs  and the LUN is
>     listed correctly with "/var/rear/recovery.sh disk_info".
>
>     When we run "rear recover", we get the following - "ERROR:
>     config.txt or hpacucli-commands.sh missing from
>     '/var/lib/rear/recovery/hpacucli/Slot_0'
>
>     hpacucli-commands.sh exists but is an empty file.
>
>     As the LUN already exist, I just need to skip or say "No" to the
>     RAID setup ... but we dont get that far.
>
>     Any assistance is gratefully accepted.
>
>     Mike
>
>
>
> --
>
> Gratien D'haese
> IT3 Consultants bvba
> Vennestraat 15, B-2560 Nijlen
>
>
> _______________________________________________
> rear-users mailing list
> rear-users at lists.relax-and-recover.org
> http://pikachu.3ti.be/mailman/listinfo/rear-users
1 - As I said, we have already recommenced upgrading.
2- IT WORKED! thank you Sir!.


Mike

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://pikachu.3ti.be/pipermail/rear-users/attachments/20131002/d7f9b4f7/attachment.html>


More information about the rear-users mailing list