[Rear-users] Problem with recovery on HP ProLiant BL460c Blade

Gratien D'haese gratien.dhaese at it3.be
Fri Nov 28 08:41:41 CET 2008


Hello all,

I'm still busy with the integration of Symantec Netbackup into ReaR. Next
week the first tests will be performed.
Integration with HP Data Protector is planned and foreseen to be done by
the end of this year.

thanks,
Gratien

> Hello Werner,
>
> Gratien works on DP integration, but I don't know when it will be ready
> (maybe you can help there ...).
>
> ReaR is - at the moment - designed to restore on sufficiently identical
> hardware and does not accomodate different disk sizes or layouts and
> different drivers. These are things on our wishlist that wait for
> somebody to hand in patches or sponsor the development. People have been
> using ReaR as a simply cloning solution for installing many identical
> systems with a manual adjustment after the cloning...
>
> Please tell us about your success or problems and do try the new "rear
> validate" option.
>
> Thanks,
> Schlomo
>
> Müller Werner wrote:
>> Hello Schlomo,
>>
>> first off all thank you for your very fast reply.
>>
>> The includes off the mii module is a leftover from my last testings
>> where I tried to recover a SLES10 system into a VM. During 'mkbackup' I
>> received a warning "Could not determine network driver for 'eth0'.
>> Please make sure that it loads automatically or add it to MODULES_LOAD'.
>> I figured out that pcnet32 used this mii-module so I added it to the
>> configuration and the restore into a VM worked fine.
>>
>> Yes we do have a backup software. For productive systems we use HP
>> DataProtector. As I just do some testings I used netfs for backup.
>>
>>
>> So I will download the latest development build and try it again.
>>
>> Thanks again.
>>
>> Best regards
>>
>> Werner Müller
>>
>>
>>
>> -----Ursprüngliche Nachricht-----
>> Von: Schlomo Schapiro [mailto:schlomo at schapiro.org]
>> Gesendet: Donnerstag, 27. November 2008 09:33
>> An: Discussions about Relax & Recover
>> Betreff: Re: [Rear-users] Problem with recovery on HP ProLiant BL460c
>> Blade
>>
>> Hello,
>>
>> welcome to ReaR !
>>
>> You used version 1.6 which does not yet automatically include USB
>> drivers which are required for the Blade Server keyboard... (I doubt
>> that the system was stuck, you just could not type anything).
>>
>> You can try the latest development build (1.7.6) from my opensuse build
>> service repository at
>> http://download.opensuse.org/repositories/home:/sschapiro/SLE_10/
>>
>> It should handle the USB keyboard automatically. Some questions about
>> your local.conf:
>>
>> - why did you need to include the mii module ? It should be included
>> automatically when needed and you should not need any MODULES or
>> MODULES_LOAD configuration on HP hardware
>> - ISO_DIR, BACKUP_PROG_ARCHIVE are set to the defaults, you could omit
>> these
>> - BACKUP_PROG_EXCLUDE overwrites the default, better use
>> BACKUP_PROG_ARCHIVE=( "${BACKUP_PROG_ARCHIVE[@]}" "/.../*" ) to include
>> the default settings
>>
>> The line about eth1: is OK and should not disturb your operations.
>>
>> Do you have a backup software ? Which one ? NETFS is mostly for testing
>> purposes and for those without a real backup software (though rsync
>> backup is usually better).
>>
>> Regards,
>> Schlomo
>>
>> Müller Werner wrote:
>>> Hello,
>>>
>>> I’m quite new to ReaR. I tried to backup a SLES10 SP2 system running
>>> on
>>> a Blade HP ProLiant BL460c . The creation of the ISO-File as well as
>>> backing up data via netfs worked fine but when I tried to restore the
>>> backed up data on the same Blade (with new Hard Disks) the boot process
>>> stuck very close to the end (I already see a login promt) and the
>>> system
>>> seems to be frozen, eg. I’m not able to enter anything.
>>>
>>> Furthermore I tried to recover the backed up system using the same
>>> ISO-Image on a HP DL380 R05 and everything worked fine.
>>>
>>> I encountered a slight difference in the behavior  to the demo movie.
>>> At
>>> the login promt appeared “ bnx2: eth1 NIC Copper Link is Up, 1000Mbps
>>> full  duplex”. After entering  <Enter>  a second login promt appeared
>>> and I was able to go ahead. After entering “rear” I was able to
>>> continue
>>> with “rear recover”. The recovery finished successfully and after
>>> rebooting the recovered system  everything was ok.
>>>
>>> I used this local.conf :
>>>
>>> --- quote ---
>>>
>>> OUTPUT=ISO
>>>
>>> MODULES=( mii )
>>>
>>> MODULES_LOAD=( mii )
>>>
>>> ISO_DIR=/tmp
>>>
>>> ISO_PREFIX="ds071232"
>>>
>>> BACKUP=NETFS
>>>
>>> NETFS_URL=nfs://192.168.71.231/ISOBackup
>>>
>>> BACKUP_PROG_ARCHIVE="backup"
>>>
>>> BACHUP_PROG_EXCLUDE=( '/sapio/*'
>>>
>>>                       '/sapmnt/*'
>>>
>>>                       '/usr/sap/trans/*'
>>>
>>>                      )
>>>
>>> --- unquote ---
>>>
>>> I attached a couple of screenshots from booting the Blade and booting
>>> and recovering the HP DL380 (screenshots.zip) and the log
>>> ‘rear.zip’.
>>>
>>>
>>> <<screenshots.zip>> <<rear.zip>>
>>>
>>> Has anybody an idea why this problem occur and how it can be solved?
>>> Please advice.
>>>
>>>
>>>
>>> Kind regards
>>>
>>> *******Werner Müller*
>>>
>>>
>>> *******FIS-ASP Application Service Providing und
>>> IT-Outsourcing GmbH
>>> *Röthleiner Weg 4
>>> D-97506 Grafenrheinfeld
>>>
>>> Tel.: 09723/9188-505  Fax:- 600
>>> email: w.mueller at fis-asp.de web: www.fis-asp.de
>>>
>>> Geschäftsführer Wieland Jakob
>>> Registergericht Schweinfurt HRB 3865
>>>
>>>
>>> ------------------------------------------------------------------------
>>>
>>> -------------------------------------------------------------------------
>>> This SF.Net email is sponsored by the Moblin Your Move Developer's
>>> challenge
>>> Build the coolest Linux based applications with Moblin SDK & win great
>>> prizes
>>> Grand prize is a trip for two to an Open Source event anywhere in the
>>> world
>>> http://moblin-contest.org/redirect.php?banner_id=100&url=/
>>>
>>>
>>> ------------------------------------------------------------------------
>>>
>>> _______________________________________________
>>> Rear-users mailing list
>>> Rear-users at lists.sourceforge.net
>>> https://lists.sourceforge.net/lists/listinfo/rear-users
>>
>> -------------------------------------------------------------------------
>> This SF.Net email is sponsored by the Moblin Your Move Developer's
>> challenge
>> Build the coolest Linux based applications with Moblin SDK & win great
>> prizes
>> Grand prize is a trip for two to an Open Source event anywhere in the
>> world
>> http://moblin-contest.org/redirect.php?banner_id=100&url=/
>> _______________________________________________
>> Rear-users mailing list
>> Rear-users at lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/rear-users
>> -------------------------------------------------------------------------
>> This SF.Net email is sponsored by the Moblin Your Move Developer's
>> challenge
>> Build the coolest Linux based applications with Moblin SDK & win great
>> prizes
>> Grand prize is a trip for two to an Open Source event anywhere in the
>> world
>> http://moblin-contest.org/redirect.php?banner_id=100&url=/
>> _______________________________________________
>> Rear-users mailing list
>> Rear-users at lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/rear-users
>
> -------------------------------------------------------------------------
> This SF.Net email is sponsored by the Moblin Your Move Developer's
> challenge
> Build the coolest Linux based applications with Moblin SDK & win great
> prizes
> Grand prize is a trip for two to an Open Source event anywhere in the
> world
> http://moblin-contest.org/redirect.php?banner_id=100&url=/
> _______________________________________________
> Rear-users mailing list
> Rear-users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/rear-users
>





More information about the rear-users mailing list